|
|
|
AKA: RCA HC20AM Home Control 2-Prong Appliance Module
|
- Use a dime or a small screwdriver to set red Housecode dial on Appliance Module to same leter as you set on Controller.
- Set black Unit Code dial on the Appliance Module to a number between 1 and 16.
- Check that the appliance switch is in the ON position, unplug the appliance from its receptacle and plug it into the Appliance Module.
- Plug the Appliance Module into a standard 120 VAC wall outlet.
- The appliance may be ON or OFF at this time.
- Repeat steps above for any other appliacne you wish to set up.
|
|
DISCLAIMER:
These instructions are provided here as a convenience for those who have already purchased
the home automation module described, and may have lost or discarded their original instructions.
Under no circumstances does the owner of this web site attest to the accuracy or usefulness of
these instructions. Use them at your own risk.
|
|
