|
|
|
The SC15A is a very small and compact color video camera that plugs into X-10's 2.4 Ghz Video Sender
(sold separately). It is powered from the Video Sender's plug-in power supply. You can place it
anywhere you want to monitor. The Video Sender transmits the video picture to the 2.4 GHz receiver
connected to your TV located somewhere else in your home (up to 100 ft. away). It also includes a
microphone so you can hear as well as see what's going on.
- Refer to the setup and operating instructions that came with the 2.4 GHz Video Sender Kit, Model
VK30A (sold separately). Make sure that the Video Sender (VT30A) and Video Receiver (VR30A) are set
up and functioning properly.
- Plug the video plug on the adapter cable into the yellow Video In jack on the Video Sender (transmitter).
- Plug the SC15A's plug into the video adapter.
- Plug the audio jack into either audio socket (red or white) on the Video Sender (transmitter).
- Plug the adapter cable's power plug into the power jack on the Video Sender.
- Plug the Video Sender's power supply jack into the adapter cable's power socket.
- Plug the power supply into any 120 VAC outlet.
- Attach the camera to a wall in the location you want to monitor using the mounting bracket (supplied). Mount it with the cable coming out of the bottom.
- Adjust the antenna on the Video Sender if necessary to aim it in the direction of the receiver you have connected to your TV or monitor.
|
 |
|
DISCLAIMER:
These instructions are provided here as a convenience for those who have already purchased
the home automation module described, and may have lost or discarded their original instructions.
Under no circumstances does the owner of this web site attest to the accuracy or usefulness of
these instructions. Use them at your own risk.
|
|
